background image

Type of food

Shelf life (months)

Poultry
Beef
Pork
Lamb
Sausage
Ham
Leftovers with meat

9 - 12
6 - 12
4 - 6
6 - 9
1 - 2
1 - 2
2 - 3

7. 

CARE AND CLEANING

WARNING!

Refer to Safety chapters.

7.1 

Cleaning the interior

Before using the appliance for the first

time, the interior and all internal

accessories should be washed with

lukewarm water and some neutral soap

to remove the typical smell of a brand-

new product, then dried thoroughly.

CAUTION!

Do not use detergents,

abrasive powders, chlorine

or oil-based cleaners as they

will damage the finish.

CAUTION!

The accessories and parts of

the appliance are not

suitable for washing in a

dishwasher.

7.2 

Periodic cleaning

The equipment has to be cleaned

regularly:

1.

Clean the inside and accessories with

lukewarm water and some neutral

soap.

2.

Regularly check the door seals and

wipe them clean to ensure they are

clean and free from debris.

3.

Rinse and dry thoroughly.

7.3 

Defrosting of the freezer

CAUTION!

Never use sharp metal tools

to scrape off frost from the

evaporator as you could

damage it.

Do not use a mechanical

device or any artificial means

to speed up the thawing

process other than those

recommended by the

manufacturer.

About 12 hours prior to

defrosting set a lower

temperature in order to

build up sufficient chill

reserve in case of any

interruption in operation.

A certain amount of frost will always form

on the freezer shelves and around the

top compartment.
Defrost the freezer when the frost layer

reaches a thickness of about 3-5 mm.

1.

Switch off the appliance or pull out

electrical plug from the wall socket.

2.

Remove any stored food and put it in

a cool place. 

CAUTION!

A temperature rise of the

frozen food packs during

defrosting may shorten

their safe storage life.

Do not touch frozen

goods with wet hands.

Hands can freeze to the

goods.

www.aeg.com

12

Summary of Contents for 5000 Series





















Reviews: