3. Close the oven door until the first position
(angle approximately 45°).
4. Hold of the oven door with one hand on
each side and pull it away from the oven
at an upwards angle.
Put the oven door with the outer side down
on a soft and level surface to prevent scratch
-
es
5. Now you can remove the inner glass pan
-
els and clean them.
To install the door follow the procedure in
reverse.
The oven door has 2, 3 or 4 panels of glass (depends on the model)
Removing and cleaning the door glasses
1. Hold the door trim (B) on the top edge of
the door at the two sides and push in
-
wards to release the clip seal.
2. Pull the door trim to the front to remove
it.
3. Hold the door glass panels on their top edge one by one and pull them upwards out of
the guide
4. Clean the door glass panels.
To install panels follow the procedure in reverse. Insert the smaller panel first, then the
larger.
What to do if…
WARNING!
Refer to "Safety information" chapter.
45°
B
What to do if…
21
Summary of Contents for E3050-6
Page 1: ...E3050 6 User manual Built under oven...
Page 23: ...23...
