5
Initial commissioning of the base system
ATTENTION!
Danger of damage to the device and reduction of power. Only technical professionals may per-
form the work described in this section.
5.1 Overview
Initial commissioning of the base system includes the following steps:
1.
Show the basic setting of the status display
2.
Set the language
3.
Set the time and date
4.
Set the battery type and capacity
5.2 Perform initial commissioning of the base system
✔
pleted.
Show the basic setting of the status display
u
If necessary, press
ESC
for 1 s to show the basic settings of
the status display.
Set the language
1. Press
SET
. The main menu appears and the
Device On/Off
entry is selected (Fig. left).
Notice
English is set as the default menu language at the factory.
2. Press
s
twice to select
System settings
.
3. Press
SET
. The
System settings
menu appears and
Language
is selected (Fig. left).
4. Press
SET
. The
Language
menu appears (Fig. left).
5. Press
r
s
to select a different language.
6. Press
SET
.
GB
749.126 | M02 | 2013-11-13
19
Summary of Contents for Tarom MPPT 6000
