12
SYSTEM Z0
Allows the setting of the BRAVO EX2's ref
erence impedance (Z0) to something other than 50Ω
(which is the default). This is
to be used on systems that do not use a Z0 of 50Ω. Reasonable values
can range from (but are not limited to) 15Ω to 300Ω.
GRID LINES
Pressing <ENTER> with this menu item selected will change the number of grid lines on the graph.
You can select between 2x2, 2X4, and 2x5 divisions on the chart.
MORE OPTIONS
Selecting this menu item, will take you to sub-menu to set, enable & disable other, less frequently
used settings. (See next section: OTHER OPTIONS, below)
