R3765/67G Series Network Analyzer Operation Manual
A.4 Soft Key Menu List
A-17
{NORMALIZE (THRU)}
{NORMALIZE (SHORT)}
{CAL MENU}
{CORRECT ON/OFF}
{INTERPOLATE ON/OFF}
{PORT EXTENSION}
{SELECT CAL}
{More 1/2}
{1PORT FULL CAL}
{2PORT CAL MENU}
{3PORT CAL MENU}
{4PORT FULL CAL}
{AUTO CAL}
{CLEAR CAL DATA}
{CAL KIT [ ]}
{Return}
{2 PORT FULL CAL}
{NORMALIZE&ISOL’N}
{Return}
{REFLEC’N}
{TRANSMISSION}
{ISOLATION}
{DONE 2-PORT}
[CAL]
For the R3765CG/67CG with OPT14 installed
{FWD. TRANS THRU}
{FWD. MATCH THRU}
{REV. TRANS THRU}
{REV. MATCH THRU}
{GROUP THRU}
{DONE TRANS}
{OPEN}
{SHORT}
LOAD
DONE 1-PORT
{P1-P2-P3 FULL CAL}
{P1-P2-P4 FULL CAL}
{Return}
{PORT1 REFLECT’N}
{PORT2 REFLECT’N}
{PORT3 REFLECT’N}
{PORT4 REFLECT’N}
{TRANSMISSION}
{ISOLATION}
{DONE 4-PORT}
To (3)
on the next page
{OMIT ISOLATION}
{FWD. ISOL’N}
{REV. ISOL’N}
{DONE ISOLATION}
{ELEC DELAY ON/OFF}
{ELECTRICAL DELAY}
{ELECTRICAL LENGTH}
{VELOCITY FACTOR}
{PHASE OFFSET VALUE}
{PHASE SLOPE}
{TRACE 2nd/1st}
{More 2/2}
To (4)
on the next page
To (5)
on the next page
{S11 (PORT1) OPEN}
{S11 (PORT1) SHORT}
{S11 (PORT1) LOAD}
{DONE PORT1 REFLECT’N}
{S22 (PORT2) OPEN}
{S22 (PORT2) SHORT}
{S22 (PORT2) LOAD}
{DONE PORT2 REFLECT’N}
{S33 (PORT3) OPEN}
{S33 (PORT3) SHORT}
{S33 (PORT3) LOAD}
{DONE PORT3 REFLECT’N}
{S44 (PORT4) OPEN}
{S44 (PORT4) SHORT}
{S44 (PORT4) LOAD}
{DONE PORT4 REFLECT’N}
{P1-P2 THRU}
{P1-P3 THRU}
{P2-P3 THRU}
{P1-P4 THRU}
{DOWN TRANS}
{P1-P2 ISOLATION}
{P1-P3 ISOLATION}
{P2-P3 ISOLATION}
{P1-P4 ISOLATION}
{P2-P4 ISOLATION}
{P3-P4 ISOLATION}
{OMIT ISOLATION}
{DOWN ISOLATION}
* 9
: Refer to R17050 Automatic Calibration Kit Manual.
*9
{SELECT 3PORT CAL}
{Return}
{P1-P2-P3 FULL CAL}
{P1-P2-P4 FULL CAL}
{Return}
