R3765/67G Series Network Analyzer Operation Manual
7.4 RESPONSE Block
7-15
7.4.3
Setting Display Coordinate Scale
The coordinate in accordance with selected format is displayed on the screen.
The coordinate scale is changed on the scale menu.
The Setting and the Explanation
Press the [SCALE] to call the scale menu. (Refer to section A.4.)
Scale menu
{AUTO SCALE}
: Automatically sets the display coordinate to be an
optimize value for display trace.
{/DIV}
: For the rectangular coordinate display, sets the value of
the vertical axis 1 scale.
*
This function cannot be set for the Smith chart or the
polar coordinates.
{REF VALUE}
: Sets the reference position value of the display
coordinate.
*
This function cannot be set for the Smith chart or the
polar coordinates.
{REF POS}
: Specifies the reference position of the display
coordinate.
*
This function cannot be set for the Smith chart or the
polar coordinates.
{MARKER
→
REF.VALUE} : The value at the active marker becomes the reference
value.
*
This function cannot be set for the Smith chart or the
polar coordinates.
{REF LINE ON/OFF}
: Selects ON/OFF of the reference position display.
*
This function cannot be set for the Smith chart or the
polar coordinates.
{TRACE 2nd/1st}
: Selects a preferred trace in displaying two traces
simultaneously.
*
This function cannot be set for the Smith chart or the
polar coordinates.
{FULL SCALE}
: Sets the size of the circle displayed for the Smith chart
and polar display.
1
2
