ADVANTEST R3267 series, Operation Manual

Page: 312 / 398

R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
5.2.9 GPIB Command Codes
5-27
Table 5-6 FORMAT Key (Display Format) (1 of 2)
Function Listener Code
Talker Request
Panel Key Remarks
Code Output Format
Limit
line Selecting limit line types
Frequency domain LIMTYP FREQ LIMTYP? 0: Frequency domain FORMAT
Time domain LIMTYP TIME 1: Time domain FORMAT
PASS/FAIL judgment ON PFC ON PFC? 0: OFF FORMAT
OFF PFC OFF 1: ON FORMAT
Reading the judgment result ––– PFJ? 0: PASS FORMAT
1: FAIL
Reading the judgment result
(in detail) ––– OPF? 0: PASS FORMAT
1: FAIL (Upper)
2: FAIL (Lower)
3: FAIL (Upper & Lower)
4: Error
Upper side FAIL points
Reading ––– FPU? Number of points n<DLM>
f1, l1<DLM>... fn, ln
<DLM> FORMAT Outputs 10
sets Max.
<DLM>
=Delimiter
Lower side FAIL points
Reading ––– FPL? Number of points n<DLM>
f1, l1<DLM>... fn, ln
<DLM> FORMAT
Limit Line 1
ON LMTA ON LMTA? 0:OFF FORMAT
OFF LMTA OFF 1: ON FORMAT
PASS range ABOVE the Line LARNG ABOVE LARNG? 0: Above the Line FORMAT
BELOW the Line LARNG BELOW 1: Below the Line FORMAT
Entering data in the table LMTAIN * ––– Frequency (Time), Level FORMAT
Deleting the table LMTADEL ––– ––– FORMAT Deleting all
data in the
table
Limit Line 2
ON LMTB ON LMTB? 0:OFF FORMAT
OFF LMTB OFF 1: ON FORMAT
PASS range ABOVE the Line LBRNG ABOVE LBRNG? 0: Above the Line FORMAT
BELOW the Line LBRNG BELOW 1: Below the Line FORMAT
Entering data in the table LMTBIN * ––– Frequency (Time), Level FORMAT
Deleting the table LMTBDEL ––– ––– FORMAT Deleting all
data in the
table
X position mode
Absolute mode LIMPOS ABS LIMPOS? 0: Absolute mode FORMAT
Relative mode LIMPOS REL 1: Relative mode FORMAT
X reference position
On the left side LIMXREF LEFT LIMXREFSW? 0: On the left side FORMAT
In the center of the screen LIMXREF CENT 1: In the center of the screen FORMAT
At the user-defined position
LIMXREF UDEF [*]
2: At the user-defined position FORMAT
Reading of X reference position ––– LIMXREF? Frequency/Time