R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
3.3.26 WINDOW Key
3-83
3.3.26 WINDOW Key
This section describes the Window menu displayed when the WINDOW key is pressed.
Measuring Window
Displays the Meas Window menu.
Window ON/OFF
Toggles the measuring window display function on or off.
ON:
Displays the measuring window on the screen.
OFF:
Removes the measuring window.
Window Position
Allows you to set the position of the measuring window.
Window Width
Allows you to set the width of the measuring window.
Window Sweep ON/OFF
Toggles the window sweep function on or off.
ON:
Performs sweeps within the range specified by the mea-
suring window.
OFF:
Performs sweeps over the entire span range.
Zoom
Displays the Zoom menu and enters into split-screen mode.
On the upper screen, three cursors are displayed: one vertical line
used to indicate the center position of the zoom and two vertical
lines used to indicate the frequency span.
On the lower screen, the magnified trace is displayed. The unit of
the X-axis is either frequency or time for the upper and lower
screens.
Zoom Position
Allows you to set the center position of the zoom.
Zoom Width
Allows you to set the zoom width (the span frequency on the low-
er screen).
Zoom on Window
The magnified screen on the lower screen is displayed in full
screen mode.
Zoom off
Returns full-screen mode to split-screen mode.
Peak Zooming
Displays the Peak Zoom menu.
Max Peak
The cursor is displayed at the maximum peak on the trace on the
upper screen, and is magnified in the center of the lower screen.
Next Peak
The cursor is displayed at the second highest peak with respect to
the present peak on the upper screen, and is magnified in the cen-
ter of the lower screen.
