R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
3.3.25 UTIL Key (Utility)
3-82
Pass/Fail Judgement ON/OFF Toggles the Pass/Fail Judgement function on or off. This function
compares a measured value with the value set in the Limit Setup
dialog box.
ON:
Performs a Pass/Fail judgement. The result is Fail if the
measurement value is greater than the limit value.
OFF:
Does not perform a Pass/Fail judgement.
Average Times ON/OFF
Toggles the trace averaging function on or off.
ON:
Sets the number of averaging times.
OFF:
Turns the trace average function off.
Hi Sens ON/OFF
Toggles the Hi Sense measurement mode on or off. This function
is used to increase measurement sensibility.
ON:
Decreases the reference level by 20 dB before a har-
monic signal is measured.
OFF:
A harmonic signal is measured within a single screen.
IM Meas OFF
Turns off the odd harmonic measurement function, and returns to
the Utility menu display.
Active Trace A/B
Switches the traces used in the occupied bandwidth power, har-
monics or spurious measurements between trace A and trace B.
A:
Uses Trace A.
B:
Uses Trace B.
