R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
3.3.23 SRCH Key (Peak Search)
3-72
Couple to F(T)
Toggles the fixed search range function on or off.
ON:
The search range is fixed on the screen.
The position of the search range does not change even
if the center frequency and the frequency span are
changed.
OFF:
Only search range is fixed on the screen, and the search
range is moved when changing the center frequency
and the frequency span settings.
The position of the search range varies according to
changes in the center frequency and frequency span.
Y Range
Sets the search range for the Y-axis.
ALL:
The entire Y-axis is used.
Display Line:
Sets the display line to within the search range.
Limit Line:
Sets Limit Line 1 and 2 to within the search range.
Display Line
Bases the search range on the display line.
ABOVE the line:
Sets the search range to the area above the display line.
BELOW the line:
Sets the search range to the area below the display line.
Limit Line 1
Bases the search range on Limit Line 1.
ABOVE the line:
Sets the search range to the area above Limit Line 1.
BELOW the line:
Sets the search range to the area below Limit Line 1.
Limit Line 2
Bases the search range on Limit Line 2.
ABOVE the line:
Sets the search range to the area above Limit Line 2.
BELOW the line:
Sets the search range to the area below Limit Line 2.
Peak Delta Y
Allows you to set a level difference used for peak searches.
