R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
3.3.18 RCL Key (Data Readout)
3-63
3.3.18 RCL Key (Data Readout)
This section describes the Recall menu displayed when the RCL key is pressed.
The analyzer changes to the split-screen mode, and a file list will be displayed on the lower screen.
Recall Register
Displays the Recall Reg (1) menu.
REG#1, #2, #3, #4, #5
Reads data from register.1, 2, 3, 4 or 5 and sets it.
Recall on POWER
Reads data immediately after turning the power on, and sets it.
more 1/2
Displays the Recall Reg (2) menu.
REG#6, #7, #8, #9, #10
Reads data from register 6, 7, 8, 9 or 10 and sets it.
Recall on POWER
Reads data immediately after turning the power on, and sets it.
more 2/2
Returns to the Recall Reg (1) menu.
Recall File
Displays the Recall File menu.
Recall
Reads data selected by List Reg/File.
List Reg/File
Displays a list of registers or files.
List Reg/File
Displays a list of registers or files.
Device RAM/FD
Sets the destination for saved files.
RAM:
Sets the destination to internal memory.
FD:
Sets the destination to floppy disk.
NOTE
Displayed when equipped with the floppy disk drive.
Device RAM/A/B
Sets the destination for saved files.
RAM:
Sets the destination to internal memory.
A:
Sets the destination to memory card A.
B:
Sets the destination to memory card B.
NOTE
Displayed when equipped with the memory card drive
(option).
