manualshive.com logo in svg

Advantek Networks ADR-18CU, User Manual, Page: 40 / 55

Share
Download
Advantek Networks ADR-18CU User Manual Download Page 40

ADSL Full-Rated Router    36

6.4 Route Table

The Route Table page displays routing table and allows the user to manually enter the 

routing entry. The routing table will display the routing status of Destination, Netmask, Gateway, and Interface. 
The interface br0 means the USB interface; lo0 means the loopback interface; and ppp1 means the PPP 
interface. 

Route Table

The Route Table displays existing ADSL router USB connection and Ethernet connection routing 
information.  It includes Destination, 

Netmask

 and 

Gateway

 address.

System Default Gateway Configuration

The system-wide Default Gateway now provides three options: None, Auto, select Interface, and Specify 
IP.

None

: This field allows the user to choose whether Default Gateway in the CPE is needed.

Auto

: This field allows the user to select the CPE to automatically decide the Default Gateway. (

System 

Default

)

Selecte Interface

: This field allows user to select a Network Interface from a list (PVCs, PPP Sessions, 

USB and LAN).  This option lets the user to associate the system-wide Default Gateway to a Network 

Summary of Contents for ADR-18CU
























































Reviews:

No comments