ADSL Full-Rated Router 17
Configure IP Address Manually
:
Step 5: Select
Use the following IP address
and
Use the following DNS server
addresses
.
IP address
: Fill in IP address 10.0.0.x (x is a number between 4 to 15).
Subnet mask
: Default value is 255.0.0.0.
Default gateway
: Default value is 10.0.0.2.
Preferred DNS server
: Fill in preferred DNS server IP address.
Alternate DNS server
: Fill in alternate DNS server IP address.
You can use ping command under DOS prompt to check if you have setup TCP/IP protocol correctly
and if your computer has successfully connected to this router.
1) Type
ping 10.0.0.2
under DOS prompt and the following messages will appear:
Pinging 10.0.0.2 with 32 bytes of data:
Reply from 10.0.0.2 : bytes=32 times<2ms TTL=64
Reply from 10.0.0.2 : bytes=32 times<1ms TTL=64
Reply from 10.0.0.2 : bytes=32 times<10ms TTL=64
If the communication link between your computer and router is not setup correctly, after you type
ping 10.0.0.2
under DOS prompt following messages will appear:
Pinging 10.0.0.2 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
This failure might be caused by cable issue or something wrong in configuration procedure.