Advantech WISE-6610 Series, User Manual, Page: 63 / 100

52 WISE-6610 Series User Manual

-r: number of attempts to send e-mail (default setting: 2)
Example: Sending an e-mail:
email -t john@doe.com -s "System Log" -m "Attached" -a /var/log/messages
The command above sends an e-mail to address john@doe.com with the subject
"System Log", body message "Attached" and attachment messages file with System
Log of the device directly from the directory /var/log/.
3.4.8.6 SSH
To access this page, click Configuration > Services > SSH .
Figure 3.44 Configuration > Services > SSH
3.4.9 Scripts
There is possibility to create your own shell scripts executed in the specific situations.
Go to the Scripts page in the Configuration section in the menu. The menu item will
expand and there are Startup Script, Up/Down IPv4 and Up/Down IPv6 scripts you
can use - there is IPv4 and IPv6 independent dual stack. For more examples of
Scripts and possible commands see the Application Note Commands and Scripts [1].
To access this page, click Configuration > Scripts .
3.4.9.1 Startup Script
Use the Startup Script window to create your own scripts which will be executed after
all of the initialization scripts are run - right after the device is turned on or rebooted.
The changes in settings will apply after pressing the
Apply button.
To access this page, click Configuration > Scripts > Startup Script .
Note! Commands and parameters can be entered only in lowercase.
Item Description
Enable SSH service Click the check box to set up Ethernet encapsulation (remote access)
through the Secure Shell (SSH) function.
Session Timeout Enter the variable in minutes to define the timeout period for the
session.
Apply Click Apply to save the values.
Note! Any changes to the Startup Script will take effect the next time the
device is power cycled or rebooted. This can be done with the Reboot
button in the Administration section, or by SMS message.