Advantech WISE-4470 Series, User Manual

Page: 29 / 58

21 WISE-4471 Series User Manual
Chapter 4
S
ystem
Configuration
Firmware Information
In this page, you can check the model name and module description. The firmware
version is also shown at the end of the configuration web page. To update the firm-
ware, go the
Firmware Version
section.

Module Name:
Name of the WISE module.

Module Description:
Description of the WISE module.

Firmware Description:
Firmware and bootloader version of the WISE module.

Web Page Version:
The web page version is given at the bottom of the Config-
uration page before the copyright information.
4.2.5 Connecting to a Cellular Network
Enter the PIN Code
First, insert a SIM card into the WISE module, and then go to the
Configuration
page and click the
Cellular
tab. Enter the PIN of the SIM card in the
PIN Authentica-
tion
dialog box. Selecting the
Auto Write PIN Code
check box will save the PIN
code to the WISE module.
Cellular Information
After the PIN code has been entered, information on the cellular network will be avail-
able in the
Cellular
tab:

PIN Status:
The PIN code status of the SIM card.

Register Status:
Registration status with the cellular network operator.

Current Service Mode:
Network device mode (e.g., LTE CAT-NB1).

Signal Strength:
Indicates reference signal receiving power (RSRP) of the cel-
lular network.

IP Address:
IP address assigned by the cellular network.