Advantech UNO-3300G Series, User Manual

Page: 24 / 56

UNO-3300G Series User Manual 14
2.10 PCI Express Mini Card Socket
There are three sockets for full size PCI Express mini cards. The first interface (CN9)
is the default defined for mSATA. The second (CN6) and the third (CN7) interface is
mainly target to support iDoor technology/ module for diversified application such as
isolated COM port, Profibus, WLAN GPRS, 3G, mRAM and so on. Users can install
the card easily by using the optional kit.
Figure 2.12 PCIE mini card sockets placement
2.10.1 iDoor Expansion Slot
At the front side, there's a iDoor Expansion slot that provide user to install Mini-PCIe
modules to extend extra I/O port for specific application, like Isolation COM, Digital
I/O, CANOpen modules.
2.11 PCIe Slot
In order to fulfill user's extensive requirements, UNO-3384G provide one PCIe x4
slot. The PCIe slot could provide user to install standard PCIe card compatible with
PCIe x4, for example, USB expansion card, Ethernet expansion card...etc.
Regarding PCI/PCIE max power support, user needs to consider PCI/PCIE card
thermal limitation.
The thermal limitation as below table:
PCI/PCIe Card need wide temperature (at least
+70
°
C
).
Condition Slot1 power Slot2 power
PCI/PCIE card without FAN 3W (Note2) 3W (Note2)
PCI card with FAN-on-card 6W (Note3) 6W (Note3)
PCIE card with FAN-on-card 10W (Note3) 10W (Note3)