Advantech TPC-B610 User Manual Download Page 43

Page: 43 / 76

TPC-B610 User Manual

pte

r 3
BIO

S S

etu

Figure 3.14 Serial Port 2 Configuration



Serial Port 1 Configuration

–

Serial Port

This item allows users to enable or disable Serial Port.

–

Change Settings

This item allows users to Change Settings of the Serial Ports. The default

setting is Auto.

–

Device Mode

This item allows users to set the mode of serial port. The default setting is

RS-232.When serial port 1 (COM1) is set to RS-485 mode via jumper JSET

COM1, this item should be selected as "RS-485 (Half Duplex)" and further

set Auto Direction (Flow) Control setting to "On (enable) or Off (disable)".

Default for this Device Mode is "RS-232".



Serial Port 2 Configuration

–

Serial Port

This item allows users to enable or disable Serial Port.

–

Change Settings

This item allows users to Change Settings of Serial Ports. The default setting

is Auto.

–

Device Mode

This item allows users to set the mode of serial port. The default setting is

RS-232.

Summary of Contents for TPC-B610













































































Search results

Summary of Contents for TPC-B610

Reviews:

Related manuals for TPC-B610

Brands by name

Popular brands

Advantech TPC-B610, User Manual

Search results

Summary of Contents for TPC-B610

Reviews:

Related manuals for TPC-B610

Brands by name

Popular brands