Advantech TPC-300 Series User Manual Download Page 85

Page: 85 / 88

TPC-300 Series/TPC-B510 User Manual

ix C

BIO

S S

etu

C.1.6

Save & Exit



Save Charges and Exit

This item allows users to exit the system setup after saving changes.



Discard Changes and Exit

This item allows users to exit the system setup without saving changes.



Save Changes and Reset

This item allows users to reset the system after saving changes.



Discard Changes and Reset

This item allows users to reset the system without saving changes.



Save Changes

This item allows users to save any changes to the setup options.



Discard Changes

This item allows users to discard any changes to the setup options.



Restore Defaults

This item allows users to restore/load default values for all setup options.



Save as User Defaults

This item allows users to save all current settings as user defaults.



Restore User Defaults

This item allows users to restore all setup options to the user default values.

Summary of Contents for TPC-300 Series

























































































Search results

Summary of Contents for TPC-300 Series

Reviews:

Related manuals for TPC-300 Series

Brands by name

Popular brands

Advantech TPC-300 Series, User Manual

Search results

Summary of Contents for TPC-300 Series

Reviews:

Related manuals for TPC-300 Series

Brands by name

Popular brands