Advantech TPC-2000 Series, User Manual

Page: 50 / 74

TPC-2000 Series User Manual 42
A.3.4 LAN RJ45 connector (CN3)
A.3.5 USB3.0 connector (CN5)
Table A.5: LAN RJ45 connector (CN3)
Pin Signal Description
1 MDI0+ In BASE-T: Media-dependent interface[0]:
1000BASE-T: In MDI configuration, MDI[0]+/- corresponds to
BI_DA+/-. In MDI-X configuration MDI[0]+/- corresponds to
BI_DB+/-.
10BASE-T and 100BASE-TX: In MDI configuration, MDI[0]+/-
is used for the transmit pair. In MDIX configuration, MDI[0]+/-
is used for the receive pair.
2 MDI0-
3 MDI1+ In BASE-T: Media-dependent interface[1]:
1000BASE-T: In MDI configuration, MDI[1]+/- corresponds to
BI_DB+/-. In MDI-X configuration, MDI[1]+/- corresponds to
BI_DA+/-.
10BASE-T and 100BASE-TX: In MDI configuration, MDI[1]+/-
is used for the receive pair. In MDI-X configuration, MDI[1]+/-
is used for the transmit pair
6 MDI1-
4 MDI2+ In BASE-T: Media-dependent interface[3:2]:
1000BASE-T: In MDI and in MDI-X configuration, MDI[2]+/-
corresponds to BI_DC+/- and MDI[3]+/- corresponds to
BI_DD+/-.
100BASE-TX: Unused
10BASE-T: Unused
5 MDI2-
7 MDI3+
8 MDI3-
Table A.6: USB3.0 connector (CN5)
Pin Signal Description
1 VBUS 5V power output
2 USB2_D- USB2.0 data negative
3 USB2.0 data positive
4 GND system ground
5 USB3_RX- USB3.0 data receive negative
6 USB3.0 data receive positive
7 GND system ground
8 USB3_TX- USB3.0 data transmit negative
9 USB3.0 data transmit positive
10 VBUS 5V power output
11 USB2_D- USB2.0 data negative
12 USB2.0 data positive
13 GND system ground
14 USB3_RX- USB3.0 data receive negative
15 USB3.0 data receive positive
16 GND system ground