Advantech TPC-1260 Page 14 User Manual Download

Page: 14 / 74

TPC-1260 User's Manual

1.1.3 Storage

The TPC-1260 provides one EIDE channel for one 2.5” 44-pin HDD and
one CompactFlash card. The system boot-up sequence is:

- HDD and CompactFlash exist simultaneously: the system will boot
from the HDD. The HDD must be set as master. If the HDD does not
contain operating system, the TPC-1260 will automatically boot from
the CompactFlash.

- HDD exists only: the system will boot from the HDD

- CompactFlash card exists only: the system will boot from the
CompactFlash

1.1.4

Safety and environment

Safety

- FCC class A and CE certificated

- BSMI certificated

- The front bezel is compliant with NEMA 4

Environment

- Operating temperature: 0~50 degrees Celsius

- Storage temperature: -20~60 degrees Celsius

- Humidity: 10~95% @ 40°C relative humidity (non-condensing)

- Vibration: 10~18 Hz: 1.5mm peak-to-peak displacement; 18~500 Hz: 1G
acceleration

Summary of Contents for TPC-1260











































































Search results

Summary of Contents for TPC-1260

Reviews:

Related manuals for TPC-1260

Brands by name

Popular brands

Advantech TPC-1260, User Manual

Search results

Summary of Contents for TPC-1260

Reviews:

Related manuals for TPC-1260

Brands by name

Popular brands