Advantech SPC-200 Series, User Manual

Page: 19 / 40

11 SPC-200 Series User Manual
Chapter 2
S
ystem
Setup
3. Connect the power connector with M12 connector to the 24 V
DC
power lines.
The power lines can either be of some power adapter or in-house power source.
4.
Figure 2.3 Pin Definition of Power Connector
Figure 2.4 Power Receptor with M12 Connector
5. Plug the power lines into the system power receptor with M12 connector.
6. Power on the system.
Power Input Pin Number Signal (Male)
M12-A-5P-M
Power
1 DC 24V-
2 DC 24V-
3 DC 24V+
4 DC24V+
5 F_GND