Advantech SOM-5962, User Manual

Page: 42 / 90

SOM-5962 User Manual 32
3.1.2.8 USB Configuration
Figure 3.16 USB Configuration

Legacy USB Support
Enables Legacy USB support. Auto option disables legacy support if no USB
devices are connected. Disable option will keep USB devices available only for
EFI applications.

XHCI Hand-off
This is a workaround for OSes without XHCI ownership change should be
claimed by XHCI driver.

USB Mass Storage Driver Support
Enable or Disable USB Mass Storage Driver Support.

Port 60/64 Emulation
Enable I/O port 60h/64h emulation support. This should be enabled for the com-
plete USB keyboard legacy support for non-USB aware OSes.

USB transfer time-out
This time-out value for Control, Bulk, and Interrupt transfers.

Device reset time-out
USB mass storage device Start Unit command time-out.

Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
Controller. ‘Auto’ uses default value: for a Root port it is 100 ms, for a Hub port
the delay is taken from Hub descriptor.