Advantech SmartFlex SR305, User Manual

Page: 18 / 63

SmartFlex SR305
5. Router Design
5.1 Router versions
Check with your local Advantech sales representative for available options and HW configura-
tions.
The SmartFlex SR305 router is supplied in the following versions (see table below). All ver-
sions are available in plastic or metal casing according to customer requirements. All versions
are available with PoE PD (Power over Ethernet – powered device) allowing the router to be
powered using both ETH0 and ETH1 interfaces, or with PoE PSE (power source equipment)
allowing the router to power other devices.
Router versions
SIM BIN
B
OUT
USB
SD
ETH W
iF
i
232 485
SM
IP
Basic version 2 x 2 x 1 x 1 x 1 x 2 x
Basic version with WiFi 2 x 2 x 1 x 1 x 1 x 2 x 1 x
Version with SWITCH board 2 x 2 x 1 x 1 x 1 x 5 x
Version with SWITCH board & WiFi 2 x 2 x 1 x 1 x 1 x 5 x 1 x
Version with RS232-RS485/422 board 2 x 2 x 1 x 1 x 1 x 2 x 1 x 1 x
Version with RS232-RS485/422 & WiFi 2 x 2 x 1 x 1 x 1 x 2 x 1 x 1 x 1 x
Version with RS232-RS485-ETH board 2 x 2 x 1 x 1 x 1 x 3 x 1 x 1 x
Version with RS232-RS485-ETH & WiFi 2 x 2 x 1 x 1 x 1 x 3 x 1 x 1 x 1 x
Table 1: Router versions
Figure 6: Basic version (plastic)
Figure 7: Basic version with WiFi (plastic)
Figure 8: Basic version (metal)
Figure 9: Basic version with WiFi (metal)
11