SmartStart SL305
7.5
Technical Parameters of Module
LTE module for EMEA
LTE parameters
Bit rate 150 Mbps (DL) / 50 Mbps (UL)
LTE FDD Cat.4, 3GPP release 9 compliant
Supported frequencies:
FDD frequencies:
B28A (700 MHz), B20 (800 MHz),
B8 (900 MHz), B3 (1800 MHz), B1 (2100 MHz),
B7 (2600 MHz)
TDD frequencies:
B40 (2300 MHz), B41 (2500 MHz),
B38 (2600 MHz)
Max power – typical 23 dBm
HSPA+ parameters
Bit rate 42.0 Mbps (DL) / 5.76 Mbps (UL)
Supported frequencies: B8 (900 MHz), B1 (2100 MHz)
Max power – typical 24 dBm
UMTS parameters
PS bit rate 384 kbps (DL) / 384 kbps (UL)
Supported frequencies: B8 (900 MHz), B1 (2100 MHz)
Max power – typical 24 dBm
GPRS/EDGE parameters
Bit rate 296 kbps (DL) / 236 kbps (UL)
Supported frequencies: 900 / 1800 MHz
Other parameters
Rx Diversity and MIMO DL 2x2
Table 15: Technical parameters of module for EMEA
Antenna Requirements
•
VSWR – <2:1 (Antenna input impedance response as function of frequency. This shows
the antenna resonances and its bandwidth).
•
SMA – 50
Ω
•
For good diversity performance, the primary and secondary antennas should have dif-
ferent polarizations.
31
