____________________________________________________________________________________________________
SKY-8260S Manual V02 20220411
Copyright 2022 Advantech Co. Ltd. All rights reserved.
Page 72
code
progress code or both
3.2.5 Security Setup
“
Administrator Password
” allows users to configure the system so that a password after
being installed is required each time the system boots, and/or an attempt is made to enter
the Setup program.
Figure 3-19: Security Menu
Note!
1. If set
the “Password Check” is [Setup], then this only limits access to
Setup and is only asked for when entering Setup.
2. If set the
“Password Check” is [Always], then this is a power on
password and must be entered to boot or enter Setup. In Setup the
User will have Administrator rights.
3. The password length must be in the following range:
Minimum length: 3
Maximum length: 20
