____________________________________________________________________________________________________
SKY-8101S Manual V04 20180321
Copyright 2016 Advantech Co. Ltd. All rights reserved.
Page 103
3.5.1 Air Filter
Note!
You need:
- A replacement air filter
- A PH2 screw driver
To replace the air filter, take off the front cover as first step.
You will find the air filter on the inside of the bezel secured by four M3 screws. Fasten
the four screws.
Hold the handle and pull the air filter with an angle of approximate 45° away
from the bezel, and then remove the air filter.
Figure 3-32: Air Filter Assembly
To install the air filter, insert the air filter with an angle of approximate 45° the bezel,
and press the air filter downward.
After inserting the air filter, tighten the four M3 screws.
3.5.2 PSU Modules
Note!
You need:
- no special tools
- A spare PSU module
To replace a PSU module, proceed as follows:
1.
Locate the PSU module to be replaced (failing / degraded).
2.
Remove the power cord from the PSU power connector
PS3.
3.
Grab the PSU handle
PS2
and unlock the PSU module by pulling the PSU lock
PS4
to the left.
4.
Hold the lock and extract the PSU module towards you.
Summary of Contents for SKY-8101
Page 2: ......
