27
RSB-3710 User Manual
C
ha
pte
r 2
H
/W
In
sta
lla
tio
n
2.7.2
Debug Port Setting
RSB-3710 can communicate with host servers using serial cables. Common serial
communication programs such as HyperTerminal, Tera Term, or PuTTY can be used
in these cases. The example below describes the serial terminal setup using Hyper
-
Terminal on a Windows host:
1.
Open HyperTerminal on your Windows PC, and select the settings as shown in
the following figure.
2.
Insert the power adapter connector to the DC jack on RSB-3710 to power on the
board. The bootloader prompt is displayed on the terminal screen.
Summary of Contents for RSB-3710
