RR75i v2
Example of connecting devices with serial interface to the USB:
Figure 31: Connection PLC to the router
Example of connecting of USB flash disk to the USB:
Figure 32: Connection flash memory to the router
Mounting USB flash drive to the system:
To use the USB flash drive in the Linux system
of the router, it is necessary to mount it. Use
dmesg
command to see the name of recently
connected device (E. g.
sda:
sda1
) and then use
mount
command. Example:
mount /dev/sda1 /mnt
5.8.9
I/O Port
Panel socket 3pin.
Pin
Ozn.
signálu
Popis
Sm ˇer toku dat
1
BIN0
Binary input
Input
2
GND
Signálová zem
3
OUT0
Binary output
Output
Table 11: Connection of I/O port
Figure 33: I/O connector
21
12-02-21
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: [email protected] — www.lucom.de
www
.lucom.de
