Advantech PPC-123, User Manual

Page: 72 / 174

PPC-123 User’s Manual 58
Chapter 6 VIA Chipset
6.1 Introduction
The PPC-123 uses the chipset PN133T (codename: Twister) from VIA
Technologies, Inc., built-in high performance 2D/3D Savage4 graphics,
flexible 66/100/133MHz system bus settings, support for PC100/133
SDRAM and multiple power saving modes make the VIA PN133 the
ideal integrated SMA chipset for the Intel Pentium
®
III, Intel
®
Celeron.
and VIA C3 processor.
The VIA VT82C686B PSIPC (PCI Super-I/O Integrated Peripheral Con-
troller) can support Intel and non-Intel based processor to PCI bus bridge
functionality to make a complete Microsoft PC99-compliant PCI/ISA
system, moreover, it also supports master mode enhanced IDE controller
with dual channel DMA engine (includes UltraDMA-33/66/100) and
interlaced dual channel commands.
6.2 Driver Installation
Before installing the Ethernet driver, note the procedures below. You
must know which operating system you are using in your PPC-123, and
then refer to the corresponding installation flow chart. Then just follow
the steps described in the flow chart. You will quickly and successfully
complete the installation, even if you are not familiar with instructions for
Windows..
Important: 1. The following windows illustrations are exam-
ples only. You must follow the flow chart instruc-
tions and pay attention to the instructions which
then appear on your screen.
Notes: 1. The CD-ROM drive is designated as "D"
throughout this chapter.
2. <Enter> means pressing the "Enter" key on
the keyboard.