background image

POS-760F  Startup Manual

1

POS-760F Socket 370 SBC For POS Application

POS-760F Socket 370 SBC For POS
Application

Startup Manual

FDD interface: Supports up to two FDDs

Serial ports: Four serial RS-232 ports, COM1, 3, 4:
RS-232, COM2: RS-232/422/485

Parallel port: Two parallel ports, supports
SPP/EPP/ECP mode

Infrared port: Shared with COM2. Transfer rates up to
4 Mbps

Keyboard/mouse connector: Supports standard
PC/AT keyboard and a PS/2 mouse

Power management: Supports power saving modes
including Normal/Standby/Suspend modes. APM 1.1
compliant

Watchdog timer: 62 level timer intervals

USB: Two universal serial bus ports

Solid State Disk

Supports one 50-pin socket for CompactFlash™ card
and one socket for one DiskOnChip

®

VGA/LCD Interface

Chipset: C&T69000 2 MB SDRAM on chip

Interface: PCI interface, 64-bit engine

Display mode: Flat panel displays up to 800 x 600 @
24 bpp, 1024 x 768 @ 16 bpp, CRT monitors up to 800
x 600 @ 24 bpp, 1024 x 768 @ 16 bpp

Ethernet Interface

Chipset: RTL 8139B

Ethernet interface: PCI 10/100 Mbps Ethernet.
IEEE 802.3 U protocol compatible

Connection: On-board RJ-45 connector

I/O address switchless setting

Built-in boot ROM

Audio Function (optional)

Chipset: VIA 82C686

Audio controller: AC97 version 2.0 compliant
interface

Audio interface: Microphone in, Line in, CD audio in,
Line out, Speaker L and Speaker R

Mechanical and Environmental

Dimensions (L x W): 203 x 146 mm (8" x 5.75")

Power supply voltage: +5 V ±5 %

For more information on this and other Advantech products,
please visit our website at:

http://www.advantech.com
http://www.advantech.com/epc

For technical support and service, please visit our
support website at:

http://www.advantech.com/support

This manual is for the POS-760F series Rev. A1.

Part No. 2007076001

1st Edition

Printed in Taiwan

Jan. 2000

  Packing List

Before you begin installing your card, please make sure
that the following materials have been shipped:

1  POS-760F all-in-one single board computer

2  serial port cables

(part no. 1701100300)

1  floppy cable

(part no. 1701340602)

1  UDMA/66 IDE flat cable

(part no. 1701400453)

1  startup manual

CD-ROM or disks for utility, drivers, and manual (in PDF
format)

If any of these items are missing or damaged, contact your
distributor or sales representative immediately.

Note 1:

For detailed contents of the POS-760F, please
refer to the enclosed CD-ROM or disk (in PDF
format).

Note 2:

Acrobat Reader is acquired to view any PDF
file. Acrobat Reader can be downloaded at:
www.adobe.com/Prodindex/acrobat/
readstep.html
(Acrobat is a trademark of Adobe.)

 

Specifications

Standard SBC Functions

CPU: Socket 370 for Intel

®

 Celeron™/Pentium III

processor

BIOS: Award 256 KB Flash memory

Chipset: VIA 82C693/82C686

System memory: Two DIMM sockets accept 32 ~ 512
MB SDRAM

Enhanced IDE interface: Supports up to four EIDE
devices. BIOS auto-detect, PIO Mode 3 or Mode 4,
UDMA/33 transfer, UDMA/66 transfer

Reviews: