Advantech POC-IPSM90PS, User Manual

Page: 20 / 40

POC-IPSM90PS User Manual 12
2.3.1 COM Pin Definition
COM uses Amphenol A00-MSAS-08PFR-SF703 (female hole type).
2.4 Installation Procedures
Before installing the POC-IPSM90PS power system onto a POC terminal or using
POC-IPSM90PS to supply power, perform a complete battery charge. Next follow the
steps below to install and setup the system.
Step 1: Remove the AC power cord and battery packs.
Step2: Configure the DC output voltage via the switch.
Pin Number Function Note
1 GND
2 GND
3 GND
4 Reserved Remove USB
5 Reserved Remove USB
6 Reserved Remove USB
7 RX Please connect to Host TX (RS232 level)
8 TX Please connect to Host RX (RS232 level)
Sleeve/Ring GND
Note! Confirm the “key” direction to identify pin 1.
SW.1 SW.2 VOUT
Switch
OFF OFF 12V (default)
OFF ON 17V
ON OFF 19V (for POC-W2xx series)
ON ON 24V