![background image](http://html1.mh-extra.com/html/advantech/pcm-27j3au/pcm-27j3au_startup-manual_2857341001.webp)
ST
AR
TUP MANUAL
1 Startup Manual
PCM-27J3AU
3-Port Audio Stereo, mPCIe, 3.5mm Jack
Packing List
Before installation, please make sure that you have:
1 x Audio mPCIe Card
1 x 3-Port Audio I/O plate with iDoor bracket
1 x Wired signal cable
1 x Startup Manual
1 x Warranty Card
If anything is missing or damaged, contact your distributor
or sales representative immediately.
Installation
Notes
For more information on this and other Advantech
products, visit our websites at:
http://www.advantech.com
http://www.advantech.com/eAutomation
For technical support and service:
http://www.advantech.com.tw/eservice
This manual is for PCM-27J3AU
Part No: 200327J300
1st Edition
December 2015
PIN Assignment of Audio Signal Connector
(14-Pin)
Documentation/Software Support Guide
PCM Module
with iDoor technology supports following
iAutomation Computing Platforms:
Embedded Automation PC UNO-2200/2300 series
Control DIN-Rail PC UNO-1300/1400 series
Control Cabinet PC UNO-3200/3300/3400 series
Control Panel Computers TPC-xx81/xx82 series
Thin Client Panel Computers TPC-xx51 series
See the following page for installation in TPC Embedded
Panel Computers and UNO Embedded Computers.
The Startup Manual is included in the package. The other
support documentation such as datasheets can be accessed
from Advantech's website.
Description of PIN Use - I/O Board CN2 / mPCIe Card CN1
Pin1
LOUT_R
Pin2
LOUT_L
Pin3
LOUT_JD
Pin4
GND_AUD
Pin5
LIN_R
Pin6
LIN_L
Pin7
LIN_JD
Pin8
GND_AUD
Pin9
MIC_R
Pin10
MIC_L
Pin11
MIC_JD
Pin12
GND_AUD
Pin13
GND_AUD
Pin14
NC