Advantech PCI-1202, User Manual

Page: 48 / 68

PCI-1202 User Manual 40
DDA Pulse Output
This section includes OUT and DIP signal:
OUT and DIR (Pulse Output Control)
There are six types of pulse output for PCI-1202. Specify the electrical
specification as differential or open collector. Then select DIR/OUT or
CW/CCW. Refe
r to table 3.21 for the pin definition of the DIR/OUT
pins. You can also refer to the dipswitch setting in chapter 2.
Figure 3.9: DDA Pulse Output
Encoder Feedback Signal
EA, EB, and EZ for differential line driver input. Please refer to table
3.22 for the encoder input signal descriptions.
Figure 3.10: Encoder Feedback Input Signal
Table 3.21: DDA Pulse Pins
Label Description
OUT+ OUT(+)
OUT- OUT(-)
DIR+ DIR(+)
DIR- DIR(-)