Advantech PCI-1202, User Manual

Page: 31 / 68

23 Chapter 3
3.2.7 Digital Output Signal Connection
Figure 3.4: Relay Type Output
OUT1 & OUT2 (Digital Output)
Digital output for each axis is designed for general-purpose output func-
tion. Please refer to the following table 3.2.
3.3 Motion Slave Modules
3.3.1 Features
• DIN rail mounting L x W x H: 124 x 72 x 53 mm)
• Max. 20 Mbps transfer rate
• Max. 6.5 MHz, 1-Axis pulse output
• 28-bit counter for incremental encoder
• Programmable acceleration and deceleration time
• T-curve and S-curve velocity profiles support
• Change speed on-the-fly
• Simultaneously start/stop on multiple motion control modules
(reserved)
• Easy installation with RJ45 phone jack and LED diagnostic
• Easy installation for servo or stepping motor driver
Table 3.2: OUT1&OUT2 Pins
Label Description
GND External Ground
DO Digital Outputs