Advantech PCE-5130, User Manual

Page: 51 / 102

39 PCE-5130 User Manual
Chapter 3
A
ward
BIOS
Setup
3.3 Standard CMOS Setup
! Date
The date format is <weekday>, <month>, <day>, <year>.
! Time
The time format is <hour> <minute> <second>, based on a 24-hour clock.
! IDE channel 0/1 Master/Slave
– IDE HDD Auto-Detection : Press “Enter” to select this option for automatic
device detection.
– IDE Device Setup :
Auto : Automatically detects IDE devices during POST
None : Select this when no IDE device is used. The system will skip the auto-
detection step to make system start up faster.
Manual : User can manually input the correct settings.
– Access Mode : The options are CHS/LBA/Large/Auto
– Capacity : Capacity of currently installed hard disk.
– Cylinder : Number of cylinders
– Head : Number of heads
– Precomp : Write precomp
– Landing Zone : Landing zone
– Sector : Number of sectors
! Drive A / Drive B
This category identifies the types of floppy disk drives installed in the system.
The options are: None/360K, 5.25"/1.2M, 5.25"/720K, 3.5"/1.44M, 3.5"/2.88M,
3.5".
! Halt On
This category determines whether system start-up will halt or not when an error
is detected during power up.
The options are: No Errors/All Errors/All, But Keyboard/All, But Diskette/All, But
Disk/Key
! Memory
This category displays base memory, extended memory, and total memory
detected during POST (Power On Self Test).
Figure 3.2 Standard CMOS Features Screen