Advantech PCA-6148, User Manual

Page: 55 / 108

Chapter 4 VGA Display & Software/Hardware Configuration 47
48-STN.BIN
Support 640 x 480 color STN DD 8/16-bit displays
(Sharp LM64C142)
48-MONO.BIN
Supports 640 x 480 dual scan monochrome displays
(Sharp LM64P8X/837)
48-EL.BIN
Supports 640 x 480 EL displays (PLANAR EL640480-A Series)
PCA-6148L Utility Disk
ROOT
SSD
MAKEROM.EXE
BIOS
AWDFLASH.EXE
6148L.BIN
VGA Display Software Configuration
The PCA-6148’s on-board VGA interface supports a wide range of
popular LCD, EL, gas plasma flat panel displays and traditional
analog CRT monitors. The interface can drive CRT displays with
resolutions up to 640 x 480 with 1.6 million colors. It is also
capable of driving color panel displays with resolutions of 800 x
600 in 64K colors. The VGA interface is configured completely
via the software utility, so you don’t have to set any jumpers.
Configure the VGA display as follows:
1. Apply power to the PCA-6148 with a color TFT display
attached. This is the default setting for the PCA-6148. Ensure
that the AWDFLASH.EXE and *.BIN files are located in the
working drive.
NOTE: Ensure that you do not run AWDFLASH.EXE
while your system is operating in EMM386 mode.