background image

PCA-6119P7 Startup Manual  1

Before you begin installing your card, please make sure that 

the following items have been shipped:
1.  PCA-6119P7 startup manual 

2002611903 

2.  Screw M4*6L (15 pcs) 

1939000410 

3.  2-year quality warranty card 

2190000902 

If any of these items are missing or damaged, please con-

tact your distributor or sales representative immediately. 

Note: 

 

Acrobat Reader is required to view any PDF 
file.Acrobat Reader can be downloaded at:        
www.adobe.com/Products/acrobat/readstep2.
html (Acrobat is a trademark of Adobe)

Standard Functions

• 

PICMG 1.0 slots: 

PCA-6119P7 supports PICMG 1.0 CPU 

boards

• 

ISA slots: 

Ten ISA slots

• 

32-bit PCI: 

Seven 32 bit/33 MHz PCI slots

• 

PICMG/PCIslot: 

One PICMG/PCI slot

Mechanical  and  Environment   

                           

• 

Dimension: 

417.02 mm x 269.99 mm

• 

Power supply voltage: 

+12 V, +5 V, -12  V, -5 V, +3.3 V,

• 

Power requirements:  

Refer to the CPU board, add-on 

card, and peripherals

• 

Operating temperature: 

0 ~ 60° C 

• 

Weight: 

0.964 kg

PCA-6119P7 Backplane: 19-slot BP for 20-slot Chassis, 10 ISA, 7 

PCI, 2 PICMG

Startup Manual

 

The board has a number of jumpers that allow you to con-

figure your system to suit your application.

The table below lists the function of each of the jumpers and

connectors.

Jumpers and Connectors

Connectors

Label

Function

PICMG1, PICMG2

PICMG1.0 CPU board slot

ISA3~ISA12

16-bit ISA bus connector

ISA1, ISA2

PICMG connector (ISA slot in 

PICMG1, PICMG2)

PPCI1~PPCI3

32 bit / 33MHz PCI slot 

SPCI4~SPCI7

32 bit / 33MHz PCI slot 

AT1

AT power connector

AT2

5V power connector (6 Pin)

AT3

3.3V power connector (6 Pin)

ATX2

5V power connector (6 Pin)

ATX3

3.3V power connector (6 Pin)

BIG1

Big 4-pin power connector

CN1

PS-On, to CPU card for ATX 

power signal 

CN2

Alarm board power connector

CN3

+5V and +12V fan connector 

KB1

Keyboard-in connector

KB2

Keyboard-out connector

KB3

Keyboard-out connector

Jumpers

Label

Function

CN1

ATX/AT Mode Selection

No jumper needed

AT Mode

Connect 3-pin ATX 

connector cable

ATX Mode

  Specifications

  Packing List

For more information on this and other Advantech 

products, please visit our website at:

http://www.advantech.com

http://www.advantech.com/eplatform

For technical support and service, please visit our 

support website at:

http://support.advantech.com

This manual is for the PCA-6119P7 Series.

Part No. 2002611903
Printed in China

4th Edition

May 2014

  

Jumpers and Connectors

Reviews: