manualshive.com logo in svg

Advantech PCA-6006, User Manual, Page: 60 / 132

Share
Download
Advantech PCA-6006 User Manual Download Page 60

PCA-6006 User’s Manual

48

Chapter 4  Chipset Software Installation 

Utility

4.1  Before you begin

To facilitate the installation of the enhanced display device drivers and 
utility software, you should read the instructions in this chapter carefully 
before you attempt installation. The device drivers for the PCA-6006 
board are located on the software installation CD. The auto-run function 
of the driver CD will guide and link you to the utilities and device drivers 
under a Windows system. The Intel® Chipset Software Installation Util-
ity is not required on any systems running Windows NT 4.0. Updates are 
provided via Service Packs from Microsoft*.

Before you begin, it is important to note that most display drivers need to 
have the relevant software application already installed in the system 
prior to installing the enhanced display drivers. In addition, many of the 
installation procedures assume that you are familiar with both the rele-
vant software applications and operating system commands. Review the 
relevant operating system commands and the pertinent sections of your 
application software’s user’s manual before performing the installation.

4.2  Introduction

The Intel® Chipset Software Installation (CSI) utility installs to the target 
system the Windows INF files that outline to the operating system how 
the chipset components will be configured. This is needed for the proper 
functioning of the following features:

• Core PCI and ISA PnP services.

• AGP support.

• IDE Ultra ATA 100/66/33 interface support.

• USB 1.1 support (USB 2.0 driver needs to be installed separately)

Note:

The files on the software installation CD are 
compressed. Do not attempt to install the driv-
ers by copying the files manually. You must use 
the supplied SETUP program to install the driv-
ers.

    

Summary of Contents for PCA-6006





































































































































Reviews:

No comments