manualshive.com logo in svg

Advantech PCA-6004, Manual

Share
Download
Advantech PCA-6004 Manual Download Page 8

2.6 10/100Base-T Ethernet Connector (CN8) .................... 17
2.7 Serial Ports (CN9: COM1; CN10: COM2) ................... 17
2.8 PS/2 Keyboard and Mouse Connector (CN11) ............. 18
2.9 External Keyboard Connector (CN12) .......................... 18
2.10 Infrared (IR) Connector (CN13) ................................... 19
2.11 CPU Fan Connector (CN14) .......................................... 19
2.12 Front Panel Connectors (CN16, CN17, CN18, CN19,
CN21 and CN29) ...................................................................... 20

2.12.1 Keyboard lock and power LED (CN16) ................. 20
2.12.2 External speaker (CN17) ........................................ 20
2.12.3 Reset (CN18) .......................................................... 21
2.12.4 HDD LED (CN19) ................................................. 21
2.12.5 SM Bus Connector (CN29)..................................... 21
2.12.6 Connecting to SNMP-1000 remote manager .......... 21

2.13 ATX Power Control Connectors (CN20 and CN21) .. 22

2.13.1 ATX feature connector (CN20) and soft power
switch connector (CN21) ................................................... 22
2.13.2 Controlling the soft power switch ............................ 23

2.14 LCD Connector (CN41) ................................................. 23
2.15 LCD Inverter Power Connector (CN42) ..................... 23
2.16 AC-97 Audio Interface (CN43) ..................................... 23

Chapter 3 Award BIOS Setup ...................................... 25

3.1 Introduction ........................................................................ 26
3.2 Entering Setup .................................................................... 26
3.3 Standard CMOS Setup ...................................................... 27

3.3.1 CMOS RAM backup ................................................ 27

3.4 Advanced BIOS Features ................................................. 28

3.4.1 Virus Warning ............................................................ 28
3.4.2 CPU Internal Cache / External Cache...................... 28
3.4.3 CPU L2 Cache ECC Checking ................................ 29
3.4.4 First/Second/Third/Other Boot Device...................... 29
3.4.5 Swap Floppy Drive .................................................... 29
3.4.6 Boot UP Floppy Seek ................................................ 29
3.4.7 Boot Up NumLock Status ......................................... 29

Summary of Contents for PCA-6004











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands