
PAX-332 User Manual
42
A.1
Cleaning the LCD Panel
When the LCD panel becomes dusty or dirty, wipe it gently with a soft cloth.
Do not rub the LCD panel with cloth of a hard or coarse material.
Do not apply pressure to the LCD surface.
Do not use an OA cleaner for cleaning as it may damage or discolor the LCD
surface.
A.2
Cleaning the Cabinet
First, unplug the power supply.
Gently wipe the cabinet with a soft cloth.
Dampen a cloth with water and neutral detergent and wipe the cabinet.
Dry the cabinet using a soft cloth.
Note!
Many plastics are used on the surface of the cabinet. Do not clean with
benzene, thinner, alkaline detergent, alcohol-based system detergent,
glass cleaner, wax, polish cleaner, soap powder, or insecticide. Do not
place rubber or vinyl against the cabinet for long periods. These types of
fluids and materials can cause the paint to deteriorate, crack, or peel.
Summary of Contents for PAX-332-C8 Series
