Advantech MIO-2270, User Manual

Page: 21 / 93

MIO-2270 User Manual 10
2.2 Connectors
2.2.1 Connector List
2.2.2 Connector Settings
2.2.2.1 12 V Power Input Connector (CN1)
The main power connector supports single 12 V input, with optional DC Jack (CN8,
co-layout with 2-pin power connector).
2.2.2.2 DDRIII SODIMM Socket (CN2)
One 204-pin/H 9.2 mm DDRIII DIMM socket supports DDR3 / DDR3L 1066 MHz for
GX-210JA, 1600 MHz for GX-415GA, up to 8 GB.
2.2.2.3 Display Interface Connections (CN3, CN15, and CN20)
The MIO-2270 display interface supports either VGA or HDMI on rear I/O and is
capable of driving a wide range of flat panel displays, including passive and active
LCD displays.The board features three display connector types; among which, one
rear I/O can accommodate either standard CRT VGA monitors or an HDMI display
and one supports LVDS-type LCD panels.
LVDS LCD panel connector (CN3)
The board supports single-channel 18-bit LVDS LCD panel displays via 14*1-pin
wafer bo. Resolution: up to 1600 x 900.
CRT display connector (CN15)
The CRT display 15-pin connector is a rear I/O connector as coastline used for con-
ventional CRT displays. Resolution: up to 2048 x 1536.
CN1 12 V Power input
CN2 DDR3 SODIMM
CN3 18-bit LVDS panel
CN5 HD audio
CN6 Inverter power / Internal SATA power
CN7 GPIO
CN8
DC jack (upon request)
CN10 mSATA
CN12 COM1 / COM2
CN14 Front panel
CN15 VGA
CN16 MIOe
CN17 Gigabit Ethernet
CN18 CPU fan
CN20 HDMI
CN21 SATA
CN22 SMBus
CN24 Internal USB
CN25 External USB
CN31 Mini PCIe
BH1 Battery