Advantech MIC-6314 Series, User Manual

Page: 70 / 136

MIC-6314 User Manual 58
3.3.5.5 Event Data Table
All event data combinations supported by the BMC integrity sensor are listed in the
table below.
3.3.5.6 Example Event Identification
The integrity sensor is listed as the last MIC-6314 sensor (see the example below
read using the IPMItool).
As previously stated, the integrity sensor does not provide a sensor reading (dis-
abled), but does support event generation at any time.
Occurred events are stored as records in the system event log and can be read using
the following IPMItool command:
Detailed information regarding single system events (event data bytes) in the SEL
can be displayed using the IPMItool “sel get <entry>”.
Table 3.9: Integrity Sensor Event Data
Component Action / Subcomponent Result Byte 1 Byte2
BMC FW
Update Successful 0x01 0x00
Update Timeout 0x01 0x04
Update Aborted 0x01 0x02
Activation Failed 0x01 0x21
Manual Rollback Initiated 0x01 0x15
Automatic Rollback Initiated 0x01 0x1D
Rollback Finished 0x01 0x10
Rollback Failed 0x01 0x09
Graceful Shutdown Timeout 0x01 0x74
FPGA
Update Successful 0x02 0x00
Update Timeout 0x02 0x04
Update Aborted 0x02 0x02
Recovery Finished 0x02 0x10
BIOS
Update Successful 0x03 0x00
Update Timeout 0x03 0x04
Update Aborted 0x03 0x02
Flash 0 Boot Failed 0x03 0x29
Flash 1 Boot Failed 0x03 0x31
[root@localhost ~]# ipmitool sdr elist
…
INTEGRITY | 06h | ok | 160.96 |
[root@localhost ~]# ipmitool sel elist
…
684 | 07/15/2016 | 18:49:19 | OEM INTEGRITY | OEM Specific |
Asserted
…