Advantech MIC-3399 User Manual Download

Page: 36 / 100

MIC-3399 User Manual

2.3.2.3

USB Configuration

Figure 2.7 USB Configuration



USB Support

This item allows users to configure the USB support parameters.



Legacy USB support

This item allows users to enable/disable legacy USB support. The auto option

disables legacy support if no USB devices are connected. The disable option

will keep USB devices available only for EFI applications. The default setting is

enabled.



EHCI Hand-Off

This is a workaround for operating systems without EHCI hand-off support. Any

EHCI ownership changes should be conducted by the EHCI driver.



Port 60/64 Emulation

This item allows users to enable/disable support for I/O port 60h/64h emulation.

This should be enabled for complete USB keyboard legacy support for non-USB

aware operating systems.

Summary of Contents for MIC-3399





































































































Search results

Summary of Contents for MIC-3399

Reviews:

Related manuals for MIC-3399

Brands by name

Popular brands

Advantech MIC-3399, User Manual

Search results

Summary of Contents for MIC-3399

Reviews:

Related manuals for MIC-3399

Brands by name

Popular brands