Advantech IPPC-6172A Series, User Manual

Page: 54 / 76

IPPC-6172A User Manual 48
HDA Controller
Options are “Enabled” and “Disabled”. Select “Disabled” if you don't want to use HDA
controller.
SLP_S4# Min. Assertion Width
The choices are 4 to 5 seconds, 3 to 4 seconds, 2 to 3 seconds, and 1 to 2 seconds.
Restore on AC Power Loss
This item allows you to restore AC power to Power Off, Power On or Last State. The
default setting is Power On.
PCIE Ports Configuration
5.8 Exit Menu
Select the Exit tab from the setup screen to enter the Exit BIOS Setup screen. You
can display an Exit BIOS Setup option by highlighting it using the <Arrow> keys. All
Exit BIOS Setup options are described in this section. The Exit BIOS Setup screen is
shown below.
Option Description
PCIE Port 0 This setting allows to enable the PCIE Port 0.
The choices are Auto, Enabled, and Disabled.
PCIE Port 1 This setting allows to enable the PCIE Port 1.
The choices are Auto, Enabled, and Disabled.
PCIE Port 2 This setting allows to enable the PCIE Port 2.
The choices are Auto, Enabled, and Disabled.
PCIE Port 3 This setting allows to enable the PCIE Port 3.
The choices are Auto, Enabled, and Disabled.
PCIE High Priority Port This setting allows to select the PCIE High Priority Port.
The choices are Disabled, Port 0, Port 1, Port 2 and Port 3.