manualshive.com logo in svg

Advantech IPPC-6172A Series, User Manual

Share
Download
Advantech IPPC-6172A Series User Manual Download Page 47

41

IPPC-6172A User Manual

Chapter 5

A

MI BIOS

Setup

IRQ

Set this value to allow the IRQ settings to be modified.

DMA

Set this value to allow the DMA setting to be modified. 

5.5

Boot Setting Configuration

Select the Boot tab from the setup screen to enter the Boot Setup screen. You can
display a Boot Setup option by highlighting it using the <Arrow> keys. All Boot BIOS
Setup options are described in this section. 

Interrupt Option

Description

IRQ3

Available

This setting allows the specified IRQ to be used by a PCI/PnP 
device. This is the default setting.

IRQ4
IRQ5
IRQ7
IRQ9

Reserved

This setting allows the specified IRQ to be used by a legacy ISA 
device.

IRQ10
IRQ11
IRQ14
IRQ15

DMA Channel

Option

Description

DMA Channel 0

Available

This setting allows the specified DMA to be used by PCI/
PnP device. This is the default setting.

DMA Channel 1
DMA Channel 3
DMA Channel 5
DMA Channel 6

Reserved

This setting allows the specified DMA to be used by a 
legacy ISA device.

DMA Channel 7

Summary of Contents for IPPC-6172A Series













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands