Advantech IDK-1115WP-45FHA1, User Manual

Page: 40 / 51

IDK-1115WP User Manual 34
4.1 Touchscreen
4.1.1 Touch Characteristics
IDK-1115WP series products use projected capacitive touchscreens.
4.1.2 Optical Characteristics
4.1.3 Mechanical Characteristics
4.2 Touch Controller
Advantech’s IDK-1115WP series projective capacitive touch screen adopts a COF
(Chip on FPC) design. Therefore, an extra touch control board is not required. This
communicates with a PC system directly through USB connectors. The superior
design is sensitive, accurate, and user friendly.
Item Specifications
Transparency 87±2%
Haze < 0.5%
Item Specifications
Surface Hardness 7H (Follows JIS K 5600 standard, use Mitsubi -
shi Pencil 750g)
Cover Lens Thickness 1.8 mm (0.07in)
Overall Thickness 2.33 ± 0.20 mm (.09 ± .007 in)
Compressive Stress >=400 Mpa
Controller and Tail Type COF (Chip on FPC tail)
FPC Tail Bending Radius R2.5mm
Holding Force for Tail 0.7kg to pull strength and sustain minutes in
straight-line pulling (180 degrees) and 90
degrees pulling orientation
Connector Pins & Pitch 4pins, pitch is 1.25mm
Top Surface Finish Type Clear
Decoration Lens Artwork Black border