ICR-4461
2. Hardware Functionality
See Chapter
for the product hardware overwiew. Table
lists a short description of the
hardware, including the links to the chapters with a detailed description.
2.1
SIM Card Slots
Slots for two SIM cards are located on the router under a metal cover. If you intend to use
this device to communicate over a cellular network, please place an activated data-provisioned
SIM card into the SIM card reader.
You can install two SIM cards simultaneously to utilize the switching feature. The SIM cards
may have different APNs (Access Point Names) adjusted. The SIM card changing procedure
is described below. Enter the PIN in the router’s web interface if the PIN is required for the
SIM (
Administration
->
Unlock SIM Card
).
Type of SIM card: Mini SIM (2FF) 25.0 x 15.0 x 0.76 mm.
Inserting the SIM card:
• Always disconnect the router from the power supply before handling the SIM card.
• Unscrew two screws on the SIM card cover and remove the cover.
• To remove an inserted SIM card, use the flat end of a spudger, or your fingernail,
press the SIM card slightly into its slot until you hear a click. After hearing this click,
release the card, and it will pop out of its slot.
• To insert a SIM card push card into the slot until it clicks into place.
• Place back the cover and fix it by two screws.
Figure 12: SIM Cards Insertion
15
