Advantech ICR-2734P, User Manual

Page: 23 / 40

ICR-2734
2.6 LED Status Indication
There are LED indicators on the front panel of the router to provide router status informa-
tion. Moreover, ETH connector, has two additional LEDs providing information about the port
status.
Caption Color State Description
PWR Green
Green
Green On
Blinking
Fast blinking Starting of the router
Router is ready
Updating firmware
USR Green Function of this LED diode can be selected by user
DAT Green Blinking Communication in progress on radio channel
TECH Green
Orange
Red On
Blinking
Fast blinking 4G technology is used by the active SIM
3G technology is used by the active SIM
2G technology is used by the active SIM
SIG Green
Orange
Red On
Blinking
Fast blinking Good signal
Fair signal
Poor signal
SIM1 Green
Red On
Fast blinking SIM1 is selected
SIM1 card problem (missing SIM1 or PIN not entered)
SIM2 Green
Red On
Fast blinking SIM2 is selected
SIM2 card problem (missing SIM2 or PIN not entered)
ETH0
ETH1 Green
Green On
Off Selected 100 Mbps bit rate
Selected 10 Mbps bit rate
ETH0
ETH1 Orange
Orange
Orange On
Blinking
Off The network cable is connected
Data transmission
The network cable is not connected
Table 6: LED Status Indication
18
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: info@lucom.de — www.lucom.de
www
.lucom.de