11
HPC-8316 User Manual
/ 用户手册
Chapter 2
S
ystem
Setup
系统安装 系統安裝
4.
将机箱的 USB 3.0 电缆、HDD LED 电缆、LAN LED 电缆、报错 LED 电缆 ( 若主板
有支持 ), 电源开关电缆以及系统复位开关电缆连接到主板。
2.
將主機板的 I/O 遮罩襯墊放在後面板上,然後把主機板固定在主機殼上 (如圖
2.4 所示)。
3.
將電源的 20 針 (或 24 針)ATX 電源介面和 8 針 /4 針 +12 V 電源介面連接到主
機板。
4.
將主機殼的 9 針 USB 電纜、HDD LED 電纜、LAN LED 電纜、電源開關電纜以及系
統重定開關電纜連線到主機板。
Figure 2.4 Installing a Motherboard
/ 安装母板 / 安裝主機板
2.3
Installing Disk Drives
/ 安装磁盘驱动器 / 安裝磁碟機
HPC-8316 comes with 16 hot-plug 3.5”/2.5” HDD trays, and two internal/external 2.5”
HDD in the rear. Please refer to the following instructions to install disk drives.
HPC-8316 支持 16 个前置 3.5”/2.5” 硬盘托架和 2 个内置 2.5” HDD 或是 2 个后置
热插入 2.5” 硬盘拖盘。请参考以下指示安装各种硬盘。
HPC-8316 支援 16 個前置 3.5”/2.5” 硬碟托架和 2 個內置 2.5” HDD 或是 2 個後置
熱插拔 2.5” 硬碟拖盤。請參考以下指示安裝各種硬碟。
Note!
HPC-8316 only support ASMB series motherboard.
HPC-8316 仅支持 ASMB 系列母板。
HPC-8316 僅支援 ASMB 系列主機板。
Summary of Contents for HPC-8316 SA
