Advantech EKI-9228G-8CMI, User Manual

Page: 255 / 324

237 EKI-9228G Series User Manual
To access this page, click Switching > Private VLAN > Configuration.
Figure 4.264 Switching > Private VLAN > Configuration
The following table describes the items in the previous figure.
To add a new VLAN:
Click Switching > Private VLAN > Configuration > Add VLAN.
Figure 4.265 Switching > Private VLAN > Configuration > Add VLAN
The following table describes the items in the previous figure.
Item Description
VLAN ID The ID of the VLAN that exists on the device.
Type The private VLAN type, which is one of the following:

Unconfigured: The VLAN is not configured as a private VLAN.

Primary: A private VLAN that forwards the traffic from the promis-
cuous ports to isolated ports, community ports, and other promis-
cuous ports in the same private VLAN. Only one primary VLAN
can be configured per private VLAN. All ports within a private
VLAN share the same primary VLAN.

Isolated: A secondary VLAN that carries traffic from isolated ports
to promiscuous ports. Only one isolated VLAN can be configured
per private VLAN.

Community: A secondary VLAN that forwards traffic between
ports that belong to the same community and to the promiscuous
ports. Multiple community VLANs can be configured per private
VLAN.
Refresh Click Refresh to update the screen.
Add VLAN Click Add VLAN to add a new VLAN.
Edit Click Edit to edit the selected entries.
Item Description
VLAN ID or Range The ID of one or more VLANs to create. To create a single VLAN, enter
its ID in the field. To create a continuous range of VLANs, use a
hyphen (-) to separate the lowest and highest VLAN IDs in the range.
To create multiple VLANs that are not in a continuous range, separate
each VLAN ID or range of VLAN IDs with a comma (,). Do not use a
space after the comma or anywhere in the field.
Submit Click Submit to save the values.
Cancel Click Cancel to close the window.